watertanksales@balmoral.co.uk
industrialtanks@balmoral.co.uk
Bolted steel cylindrical tanks are manufactured in aluminium, galvanised and stainless steel. The range of materials on offer provides customers with cost effective and project specific options in the fire protection, potable and irrigation water storage sectors.
Balmoral offers an extensive range of cylindrical tanks. Vitually unlimited dimensions and capacities allows clients to select a design for their specific application. These options provide the flexibility to increase the tank height and reduce the diameter while maintaining the volume if the footprint is an issue. Alternatively, the diameter can be increased and height reduced if required.
Two types of tank sealant are offered, liner and mastic; the most common being the liner sealed design. The inside of the tank shell is lined with a synthetic EPDM, reinforced PVC or butyl rubber liner. The purpose of the liner is to separate the water from the tank shell. The concrete base and shell are also lined with geo-textile matting to provide additional protection against damage to the liner.
Balmoral’s cylindrical tank shell design is manufactured using pre-mill galvanized steel, with 305g/m² of zinc coating each side. On occasion, where heavier designs are required, the sheets will be hot dipped galvanized with more than 610g/m² zinc coating on either side. For specialised applications aluminium and stainless steel tank options are available.
All Balmoral tank fittings, flanges and accessories are also hot dipped galvanized as standard with options of epoxy or polyester coatings available. The galvanized coating of the tank shell along with the options of an epoxy performance coating for such applications as potable water or polyester coatings for aesthetic requirements guarantee long durability, low maintenance and extended life-cycle costs of the tank shell. Colour options for the epoxy or polyester coatings are available if required.
On standard galvanized tank designs, the coating of the tank shell doesn’t mean a reduction of the galvanized zinc coatings, the epoxy and polyester coatings are in addition to the galvanizing process.
Galvanized roof purlins are kept out of the stored water to extend the life of the tank roof cover. All nuts, bolts and washers are spun galvanized coated, structural components such as top and bottom angles, wind stiffeners and access manways are hot dipped galvanized with in excess of 610g/m² of zinc coating.
Balmoral cylindrical sectional tanks for fire protection sprinkler application are manufactured in accordance with FM Approvals. Designs in accordance with NFPA 22 can also be supplied.
Balmoral Tanks strives to provide the best quality product on the market. To achieve this, the company adheres to a production Quality Management System that is accredited to ISO9001:2015 standards. This ensures that all panels and accessories are produced under the most stringent quality audit to meet the required structural and durability performance.
Customer service is of the highest importance to Balmoral. Therefore, the company continually advises clients through all stages of the tank production, from initial proposal and design, through supply and installation to final testing and commissioning. This finely tuned process ensures that specific project parameters are met to the highest possible level.
| Application | Fire fighting sprinkler tanks |
| Tank type | Galvanised cylindrical tank to LPCB: LPS 1276 GRP sectional tank to LPCB: LPS 1276 |
| Dimensions |
Galvanised cylindrical: Ø10.92m x 12.65m |
| Capacity | Galvanised cylindrical: 1130m3 GRP sectional: 205m3 |
| Scope of work | Design, manufacture, install |
| Installer | Balmoral Tanks |
| Application | Fire fighting sprinkler tank |
| Tank type | Pre-mill galvanised steel cylindrical |
| Dimensions |
10.2 x Ø11.7m |
| Capacity | Two tanks with total capacity of 2050m3 |
| Scope of work | Design, manufacture, install, test |
| Installer | Balmoral Tanks |
