Anaerobic
digestion

Anaerobic digestion (AD) processes plant-derived materials, known as biomass, into gas to be used for heating and power; the resultant gas is called methane or biogas and is created by bacteria which digest biomass and produce methane as a by-product.

Epoxy coated steel tanks

Epoxy coated steel tanks form an integral part of the company’s industry offering. These products are widely specified by the water, wastewater, desalination, food processing, agricultural, chemical, biogas, anaerobic, fire and digester sectors

Product overview

Concrete tanks

Balmoral is the UK's first choice for large scale reinforced concrete digester tanks. Company personnel have completed some very demanding construction projects of this type since the early 2000s.

Product overview

Roof structures

All Balmoral roof structures are designed in-house, meaning the company offers the most appropriate solution while controlling delivery and service demands. Suitable for new build, but also many retro-fit scenarios

Product overview

Tank installation

Balmoral Tanks provides full installation services for all products. On major projects a detailed pre-start site survey is included as standard and this can be made available for all projects on request

Product overview

Technical services

Comprehensive inspection, maintenance, repair and refurbishment services

Product overview

What is anaerobic digestion?

Anaerobic digestion (AD) processes plant materials, known as biomass, into gas to be used for heating and power; the resultant gas is called methane or biogas and is created by bacteria which digest biomass and produce methane as a by-product.

Biomass includes anything that is plant-derived; municipal solid waste, manure, crop residues, compost, food waste, paper and waste water. Crops can be grown specifically for use in AD, as a supplementary feedstock, or a stabilising material. Biogas has been used in the UK since 1895 when gas from sewage was used in street lamps by the city of Exeter.

Looking at this in more detail, anaerobic digestion is a natural process where plant and animal materials are broken down by micro-organisms in the absence of air as follows:

  • The AD process begins when biomass is put inside a sealed tank or digester
  • Naturally occurring micro-organisms digest the biomass which releases a methane-rich gas, known as biogas that’s used to generate renewable heat and power. The process helps cut fossil fuel use and reduce greenhouse gas emissions
  • The remaining material, known as digestate, is rich in nutrients and can be used as a fertiliser

Many forms of biomass are suitable for AD including food waste, slurry and manure, as well as crops and crop residues. However, woody biomass cannot be used because the micro-organisms can't breakdown the lignin - the compound that gives wood its strength.

AD is not a new technology, it has been used in the UK since the late 1800s, but an increasing number of AD plants are being built to generate clean renewable energy. AD is also used to treat waste produced in homes, farms, supermarkets and industry which helps divert waste from landfill.

The products of AD are referred to as biogas and digestate. Biogas is a mixture of 60% methane, 40% carbon dioxide and traces of other contaminant gases. The exact composition of biogas depends on the type of feedstock being processed.

Biogas can be combusted to provide heat and/or electricity. Alternatively, the biogas can be upgraded to pure methane, often called biomethane, by removing other gases. This pure stream of biomethane can then be injected into the mains gas grid or used as road fuel.

Digestate is made from left-over indigestible material and dead micro-organisms. It contains valuable plant nutrients such as nitrogen and potassium. It can be used as a fertiliser and soil conditioner.

Balmoral Tanks wishes to thank NNFCC, The Bioeconomy Consultants, for their kind assistance in preparing the copy for this page.

1Different types of anaerobic digestion

The term AD covers several different processes; the most common are shown below and can be classified according to whether they are:

  • Mesophilic, 25-45°C; or thermophilic, 50-60°C
  • Wet, 5-15% dry matter in the digester; or dry, over 15% dry matter in the digester
  • Continuous flow or batch
  • Single, double or multiple digesters
  • Vertical tank or horizontal plug flow
2Mesophilic or thermophilic
3Wet or dry
4Continuous or batch flow
5Single or multiple digesters
6Vertical or horizontal plug flow
7Planning an AD project
Biogas plant example

Product literature and certification

Product literature

Product certification

Case studies

Agricultural biogas plant - Brålanda, Sweden
Agricultural biogas plant - Brålanda, Sweden
1Specification
Application Agricultural biogas plant
Tank type efusion™ epoxy coated steel tank
Dimensions 2 no. Ø17.94 x 8.46m efusion storage tanks with PVC double membrane roof
Fusion bonded steel tank kit - pH 2-11
Scope of work
Design, manufacture and install
2Overview
Biogas plant - Jordberga, Sweden
Biogas plant - Jordberga, Sweden
1Specification
Application Biogas plant
Tank type efusion™ epoxy coated steel tanks
Dimensions 3 no. Ø20.28 x 15.02m efusion storage tanks with steel digester roof kit
3 no. Ø24.18 x 10.86m efusion storage tanks with double membrane roof
Fusion bonded steel tank kit - pH 2-11
Scope of work
Design, manufacture and install
2Overview

Enquiries

-

Additional information (if known)

Please give an indication of required tank capacity
Is your tank installation to be located indoors or outdoors?
Please provide foundation type/information, if known
Please provide accessibility distances around the proposed tank location

View Balmoral Tanks terms and conditions of use.

Latest news

Balmoral Group

©2018 Balmoral Group Holdings Ltd

Search