Global water
storage solutions

Balmoral water tanks are used in many of the world’s most prestigious construction projects. The company’s potable, grey, rainwater and fire fighting sprinkler system water tanks are relied upon to provide a safe, clean and reliable water source on a global basis.

Cylindrical steel tanks

Cylindrical sectional tanks are manufactured in aluminium, galvanised and stainless steel. The range of materials on offer provides customers with cost effective and project specific options in the fire protection, potable and irrigation water storage sectors

Product overview

GRP sectional tanks

Balmoral GRP sectional water tanks provide water storage in capacities of 1m3-10,000m3 and are erected to heights of 4m in 1m and 0.5m increments. With an unrivalled reputation for quality and service, Balmoral GRP sectional tanks can be pre-insulated and carry full WRAS and LPCB approvals

Product overview

Steel sectional tanks

Hot pressed steel tanks are designed and manufactured by Balmoral Tanks under the brand name of Horseley Bridge. Established in 1880, Horseley Bridge pioneered the use of bolted sectional water tanks

Product overview

Epoxy coated steel tanks

Epoxy coated steel tanks form an integral part of the company’s industry offering. These products are widely specified by the water, wastewater, desalination, food processing, agricultural, chemical, biogas, anaerobic, fire and digester sectors

Product overview

Tank towers

Balmoral Tanks provides a design and supply service for towers to fully accredited standards

Product overview

Tank installation

Balmoral Tanks provides full installation services for all products. On major projects a detailed pre-start site survey is included as standard and this can be made available for all projects on request

Product overview

Technical services

Comprehensive inspection, maintenance, repair and refurbishment services

Product overview

Water storage

Offering a wide range of project-specific options including GRP and galvanised steel hot press panel tanks to bolted steel cylindrical tanks Balmoral brings an unrivalled level of experience to the water storage sector.

Fully accredited products, designed and supported by the best people in the business, mean that you can specify and install a Balmoral tank with confidence at highly competitive global rates.

Accessories and ancillaries

Pipework configuration

The inlet or delivery pipe can enter the tank through either the side wall at the top of the tank or into a raised chamber. Flow can be controlled through a ball valve, equilibrium float valve or automatic float switch.

Overflows should be positioned in accordance with the required air gap, and all outlets (suction), drains and overflows will come through the side walls of the tanks.

Overflows and warning pipes terminate at high level, horizontally, and can be extended to the floor if required.

Low level access panels

The low level access panel was introduced by Balmoral Tanks to address confined space issues. Essentially, when a tank is being constructed onsite, it will ultimately become a confined space as the installation team completes the build.

Pipe connections

Customers are asked to provide full details when ordering. The type of pipe connection should be specified together with the relevant standard to which the coupling flanges are drilled or the pipes screwed. To assist delivery, the size and position of each connection should also be specified at the time of ordering. Ball and gate valves and all pipework, including bends and flanges, can be supplied if specified at the time of ordering.

Connections can be supplied as flanged stools to BS4504, ASA or DIN standards, or, for small pipework, screwed sockets to BS1387. The connections are fitted to the plates in positions agreed at the time of order.

Ball Float Valve

These are installed at the end of the incoming water supply pipe and automatically keep the tank full.

Product literature and certification

Product literature

Product certification

Case studies

Sir C Duncan Rice Library, University of Aberdeen
Sir C Duncan Rice Library, University of Aberdeen
1Specification
Application Potable, non-potable water storage and fire fighting sprinkler tank
Tank type GRP sectional tanks
Dimensions

15 x 3 x 3.5m | 5 x 3 x 3m | 2 x 2 x 2m | 2 x 2 x 2m
and one-piece 1370 litre break tank

Scope of work
Design, manufacture
Main contractor
Pihl UK
Installer SPARKS
2Overview
Nestlé processing plant, Malaysia
Nestlé processing plant, Malaysia
1Specification
Application Potable water storage
Tank type Epoxy coated steel tanks with roofing
Dimensions 1off Ø9.4m x 18m high; 1off Ø14m x 18m high
Capacity Two tanks with total capacity of 3650m3
Scope of work
Design, supply, deliver
Installer Locally provided
2Overview

Enquiries

-

Additional information (if known)

Please give an indication of required tank capacity
Is your tank installation to be located indoors or outdoors?
Please provide foundation type/information, if known
Please provide accessibility distances around the proposed tank location

View Balmoral Tanks terms and conditions of use.

Latest news

Balmoral Group

©2018 Balmoral Group Holdings Ltd

Search